your GEAR Tent peg VP18 - 20 pieces - Aluminium V-profile peg - 180x18x12 mm tent anchor
€15.99
%€24.90(35.78% saved)available
Your Quantity Discount:
from 2 items = 5 €
from 4 items = 15 €
from 5 items = 25 €
- The high-quality set consists of 20 V-profile aluminium ground nails and is ideal for fixing tents, awnings, tarpaulins, pavilions and many other items from the outdoor, camping and garden sector.
- Herring with stable V profile that tapers to a point at the bottom. A very light and durable trekking ground anchor with the dimensions: Length: 18 cm, width: 18 mm, depth: 12 mm
- The tent nail is designed for normal ground conditions such as grass, lawns, meadows, forest soils and camping sites with few stones and tree roots and should be used without a camping hammer
- The V-shaped construction offers a very large surface area for anchoring in the ground. It becomes almost impossible to unscrew. Maximum stability | best possible hold | easy handling
- The hook at the upper end prevents the tension line from slipping off. If there is resistance when the herring is driven in, it must be realigned to avoid damage.
Product information "your GEAR Tent peg VP18 - 20 pieces - Aluminium V-profile peg - 180x18x12 mm tent anchor"
yourGEAR tent peg VP18 - lightweight V-profile tent peg made of aluminium - as a set of 20 pieces - safe and relaxed camping, even when it blows!
This aluminium tent peg is ideal for camping on normal ground. This includes, above all, the ground you will find on most tent and camping sites. Stable ground anchors are particularly important in strong winds and with high loads on the guy ropes. The tent peg made of solid galvanised steel meets this criterion and anchors your tent firmly to the ground. The curved top prevents the guy line from slipping off the tent peg.
To ensure that the tent peg has optimum hold in the ground, it should be hammered in at a 45° angle and completely into the ground. Note that the hook (eye) attached to the head of the tent peg points away from the tent, otherwise the tensioning line will find no or only very poor hold. The tent ropes should be used as long as possible when tensioning. A flat angle leads to better absorption of wind forces.
A camping hammer (rubber mallet) can be used to easily drive the peg into the ground even on harder soils. If resistance occurs when driving in the tent peg, usually caused by stones or roots, it is imperative to pull out the tent peg and re-position it. In such a case, hitting the tent peg harder with a hammer will not achieve the desired result, but will damage the pegs. When dismantling, it is advisable to use a peg puller to remove the ground pegs.
The VP18 peg is made of aluminium and weighs only a few grams. The ground peg has a V - profile of 18 x 12 mm, a length of 180 mm and is supplied as a set of 20 pieces.
yourGEAR is a brand from Germany.
- The high-quality set consists of 20 V-profile aluminium ground nails and is ideal for fixing tents, awnings, tarpaulins, pavilions and many other items from the outdoor, camping and garden sector.
- Herring with stable V profile that tapers to a point at the bottom. A very light and durable trekking ground anchor with the dimensions: Length: 18 cm, width: 18 mm, depth: 12 mm
- The tent nail is designed for normal ground conditions such as grass, lawns, meadows, forest soils and camping sites with few stones and tree roots and should be used without a camping hammer
- The V-shaped construction offers a very large surface area for anchoring in the ground. It becomes almost impossible to unscrew. Maximum stability | best possible hold | easy handling
- The hook at the upper end prevents the tension line from slipping off. If there is resistance when the herring is driven in, it must be realigned to avoid damage.
Material
Main material: Aluminium
Features
Type: Tent peg
Intended purpose: normal ground (woods and fields)
Product line: yourGEAR Camping
Dimensions
Max. length approx.: 180 mm
Width max. approx.: 18 mm
Max. hight approx.: 12 mm
Further information: 20 unit(s)
Colors, shapes, designs
Primary colour: silver
Data
GTIN (EAN): 4260635710637
Brand: yourGEAR
Item net weight approx.: 0,36kg
Pack size: (LxWxH) 18x10x18cm
Responsible economic operator (manufacturer) for products of the brand ‘your GEAR’:
Spreen Online GmbH
Harderhook 19
46395 Bocholt
Germany
E-Mail: info@spreen-online.de
• Similar products
Content: 8 piece (€2.62 / 1 piece)
Content: 20 piece (€1.10 / 1 piece)
Content: 8 piece (€3.37 / 1 piece)
Content: 8 piece (€2.38 / 1 piece)
Content: 8 piece (€2.75 / 1 piece)
Content: 8 piece (€2.25 / 1 piece)
Content: 8 piece (€3.37 / 1 piece)
Content: 8 piece (€2.38 / 1 piece)
Content: 24 piece (€0.79 / 1 piece)
Content: 24 piece (€0.58 / 1 piece)
Content: 20 piece (€0.90 / 1 piece)