yourGEAR Tent peg VK22 - 20 pieces - steel square peg - 220x6x6 mm tent anchor
yourGEAR tent peg VK 22 - very sturdy square tent peg made of galvanised steel - as a set of 20 pieces - safe and relaxed camping, even when it blows!
This robust tentpeg is ideal for camping on normal to hard ground. This includes, above all, the surfaces that you will find on most tent and camping sites. Stable ground anchors are particularly important in strong winds and when the guy ropes are subjected to high loads. The tent peg made of solid galvanised steel meets this criterion and anchors your tent firmly to the ground. The curved top prevents the guy line from slipping off the tent peg.
To ensure that the tent peg has optimum hold in the ground, it should be hammered in at a 45° angle and completely into the ground. Note that the hook (eye) attached to the head of the tent peg points away from the tent, otherwise the tensioning line will find no or only very poor hold. The tent ropes should be used as long as possible when tensioning. A flat angle leads to better absorption of wind forces.
A camping hammer (rubber mallet) can be used to easily drive the peg into the ground even on harder soils. If resistance occurs when driving in the tent peg, usually caused by stones or roots, it is imperative to pull out the tent peg and re-position it. In such a case, hitting the tent peg harder with a hammer will not achieve the desired result, but will damage the pegs. When dismantling, it is advisable to use a peg puller to remove the ground pegs.
The VK 22 peg is made of galvanised steel. The ground peg has a square profile of 6 x 6 mm, a length of 220 mm and is supplied as a set of 20.
yourGEAR is a brand from Germany.
- Tent peg set with 5 pegs, made of galvanized steel. The nails are used to secure tents, sun sails, tarps, pavilions, sun protection, visual cover, tension lines & beach shells
- Herring with extremely stable square profile that tapers to a point at the bottom. A very robust, durable and inflexible ground anchor with the dimensions: Length: 23 cm, material thickness: 6 x 6 mm
- The tent nail is designed for hard and normal ground conditions such as grass, lawns, meadows, forests as well as stony and loamy soils and is suitable for a camping hammer.
- Sophisticated square profile herring with an ideal material thickness, dimensional stability and stiffness. The Pflog is ideal for securing tents, garden pavilions, beach shells, tarpaulins and sails.
- The hook at the upper end prevents the tension line from slipping off. If there is resistance when the herring is driven in, it must be realigned to avoid damage.
Material
Main material: Steel, galvanised
Features
Type: Tent peg
Intended purpose: hard and normal ground (stony ground, woods, fields)
Product line: yourGEAR Camping
Dimensions
Max. length approx.: 220 mm
Width max. approx.: 6 mm
Max. hight approx.: 6 mm
Further information: 20 unit(s)
Colors, shapes, designs
Primary colour: golden yellow
Data
GTIN (EAN): 4260635710545
Brand: yourGEAR
Item net weight approx.: 1,2kg
Pack size: (LxWxH) 22x12x4cm