your GEAR Capri Sun Blocker 3,3 x 2 m - wind-permeable front wall for sunblind, sun protection

your GEAR Capri Sun Blocker 330 x 200 cm - Front wall for camper vans, motorhomes, and caravans.

The Sun Blocker Capri from your GEAR is an awning attachment that is pulled into the vehicle awning´s keder rail. The front wall construction made of shading special fabric offers protection against strong sunlight and increases privacy.

The front wall is suitable for all common awnings on motorhomes, camper vans, or caravans. The awning wall has 3 sewn-in keders with diameters of 7.0 mm, 6.2 mm, and 4.3 mm. The installation is done by pulling the keder into the front panel of the awning, which usually has a mounted keder rail with the appropriate diameter. After the wall has been pulled in, the 4 robust tension straps are anchored in the ground with tent pegs. The setup is quick and easy in just a few minutes. It can be done on any awning, regardless of the height at which it is mounted on the vehicle.

your GEAR offers the Sun Blocker Capri in 6 sizes, each differing in the width of the protective wall. The available widths are 240 cm, 280 cm, 330 cm, 370 cm, 430 cm, and 480 cm. The height of 200 cm is the same for all models. Thus, we offer the right front wall for almost all awning widths. If the width of your awning is between our offered dimensions, we recommend choosing the next smaller size. The quick setup also makes the front wall ideal for short stays.

The attached mesh fabric provides shade and also offers some wind protection. The fabric provides about 60% shading. The material is completely air-permeable and transparent. You can see through it and observe what is happening around you. Additionally, the wall increases the stability of the awning as it acts like a tensioning system, additionally securing the extended vehicle awning in light wind.

To tension the wall, 4 long and robust nylon tension straps are used, which are inserted into the front wall and are infinitely adjustable. 4 V-profile tent pegs made of steel anchor the wall securely in the ground. All tension points are reinforced and double-stitched.

The package includes the front wall, 4 nylon tension straps, tent pegs, and a packing bag. The large transport bag ensures stress-free repacking of the front wall and accessories.

As a quality feature of our your GEAR tents, we use only selected materials:

The high-quality mesh fabric is robust and weather-resistant.

your GEAR is a brand from Germany.

Sun protection

The air-permeable fabric blocks part of the UV radiation and provides about 60% shading while minimally impacting the view.

Wind protection

The special fabric offers additional protection against wind in addition to sun protection.

3 Keder cores

Three keders for insertion into the vehicle awning are firmly sewn: • 7.0 mm • 6.2 mm • 4.3 mm.

Nylon straps with quick-release fasteners

The wall is fixed to the ground with 4 stable tension straps and tent pegs. Buckles on the straps make assembly and disassembly easier.

high-quality special fabric

The mesh fabric is made of 100% polyester. It is wind and air-permeable and provides 60% shading.

robust packing bag

The extra-large packing bag ensures stress-free packing of the protective wall and accessories.

Dimensions

• 6 widths: 240 cm / 280 cm / 330 cm / 370 cm / 430 cm / 480 cm

• Length: 200 cm

• Total weight: 1.25 kg (240 cm version) - 2 kg (480 cm version)

Fabric

Special fabric: 100% polyester, air and light permeable, robust & lightweight.

Capri 2.4

The smallest version of the Capri fits perfectly with a width of 240 cm on the awning of smaller vehicles.