yourGEAR tent peg T30-ABS - stable T-profile tent peg made of ABS plastic - as a set of 40 pieces - safe and relaxed camping, even when it blows!
This plastic tent peg is ideal for camping on normal ground. This includes, above all, the ground you find on most tent and camping sites. Stable ground anchors are particularly important in strong winds and with high loads on the guy ropes. The tent peg made of solid galvanised steel meets this criterion and anchors your tent firmly to the ground. The curved top prevents the guy line from slipping off the tent peg.
To ensure that the tent peg has optimum hold in the ground, it should be hammered in at a 45° angle and completely into the ground. Note that the hook (eye) attached to the head of the tent peg points away from the tent, otherwise the tensioning line will find no or only very poor hold. The tent ropes should be used as long as possible when tensioning. A flat angle leads to better absorption of wind forces.
A camping hammer (rubber mallet) can be used to easily drive the peg into the ground even on harder soils. If resistance occurs when driving in the tent peg, usually caused by stones or roots, it is imperative to pull out the tent peg and re-position it. In such a case, hitting the tent peg harder with a hammer will not achieve the desired result, but will damage the pegs. When dismantling, it is advisable to use a peg puller to remove the ground pegs.
The T30 peg is made of ABS, an amorphous plastic with very good mechanical properties, and weighs only a few grams. The peg has a T - profile of 20 x 20 mm, a length of 300 mm and is supplied as a set of 40 pieces.
yourGEAR is a brand from Germany.
- Tent peg set consisting of 40 pegs, made of ABS plastic. The nails are used to secure tents, sun sails, tarps, pavilions, sun protection, sight protection, tension ropes & beach shells
- Peg with stable T profile. The ground anchor is pointed at the bottom. The high-quality workmanship makes the ground anchor very robust and durable. Profile width / depth: 20mm, length: 300 mm
- The tent nail is designed for normal ground conditions such as grass, lawns, meadows, forest floors and camping sites with few stones and tree roots and is suitable for a camping hammer.
- Sophisticated T-profile Peg with a large surface that anchors itself to the ground - turning out is almost impossible. The Peg is ideal for securing tents, garden pavilions, beach shells, tarpaulins and sails.
- The hook at the upper end prevents the tension line from slipping off. If there is resistance when the herring is driven in, it must be realigned to avoid damage.
Material
Main material: ABS plastic
Features
Type: Tent peg
Intended purpose: normal ground (woods and fields)
Product line: yourGEAR Camping
Dimensions
Max. length approx.: 300 mm
Width max. approx.: 20 mm
Max. hight approx.: 20 mm
Further information: 40 unit(s)
Colors, shapes, designs
Primary colour: yellow
Data
GTIN (EAN): 4260635710576
Brand: yourGEAR
Item net weight approx.: 1,4kg
Pack size: (LxWxH) 30x20x10cm