your GEAR Solarplane SC-800x500 - Rectangular Solar Cover - 300 µ Thick Solar Film - Solar-Powered Pool Heating
A solar pool cover provides an easy way to heat the water in your home pool or swimming pool using the sun. This economical method of water heating uses the warmth of the sun. The solar energy heats the air trapped in the nodules. This warm air then transfers its energy to the water, increasing the water temperature.
your GEAR is a brand from Germany.
Important Handling Notice
For a solar cover, it is important that the nodules of the film float in the water. This means that the solar cover is always placed on the water surface with the nodules facing down. Furthermore, it is important that the solar cover floats and that as little water as possible is on the solar cover. To ensure the pool cover floats independently, it should always be slightly smaller than the water surface to be covered. This ensures that water accumulated on the cover flows back into the pool over the edge of the cover. If the cover is too large, the water cannot flow back into the pool. The cover is pushed underwater, the air in the nodules barely heats up, and the solar heating effect fails.
Advantages of a Pool Solar Cover
• Increases pool temperature through solar energy gain
• Reduces water evaporation by up to 98%
• Reduces contamination
• Reduces the consumption of water care products by up to 30%
• Reduces energy consumption by more than 50%
Using a solar cover not only provides you with warm water. The reduced water evaporation, lower water contamination, and associated savings on care products and the electricity-free water heating save you a lot of money.
Technical Data
Cover size: 800 x 500 cm
Material thickness: 300µ (300 my = 0.3 mm)
Size of nodules: Ø 10 mm x 4 mm
Number of nodules: approx. 5600 per square meter
Material: Polypropylene
The stated size of the cover is the actual size. Therefore, the size of the cover does not correspond to the pool size specifications. Measure the water surface of your pool to determine the required cover size.
Our pool cover can be easily cut with scissors.
Durability and Lifespan of a Solar Cover
A solar cover does not last forever, as it is constantly exposed to UV radiation, heat, chlorine, and algaecides during use. Therefore, a solar film is classified as a consumable material. With the thickness of the material, the durability also increases, but the cover becomes stiffer and more unwieldy as the material thickness increases. We have chosen a thickness of 300 my, which we believe provides the best balance between acquisition cost, handling, and lifespan.
It is important that the cover is only used to heat the water. It is not designed as a permanent pool cover. For a permanent pool cover, you should use a polyester cover, as it is more resistant. The solar cover should not be used at air temperatures above 35° Celsius, as the air in the nodules heats up too much and the associated thermal expansion can damage the material and deform the cover.
When the solar cover is not in use, dry it and store it in a place without sunlight.
Following the above points, the solar cover will serve you well for the next 2 to 3 summers.
- Blue solar tarpaulin with air chambers for heating pool and swimming pool water. The rectangular solar pool cover measures 800 x 500 cm and is 300 micrometers thick (0.3 mm without air chambers)
- Solar cover with 5600 air inclusions per 1 m² and a diameter of 1 cm per knob. The film heats the water, reduces cooling and reduces water evaporation by approx. 90%
- The pool tarpaulin heats the water by 4 - 8°C. However, the tarpaulin must float freely with the air chambers pointing downwards. Too much water on the tarpaulin prevents efficient heating
- Chlorine & UV resistant 4-in-1 solar film - water heating by day, insulation at night, protection against pollution, reduction of the need for chemical water care products by 40-60%.
- Accessories for pool water care. Foil with air inclusions (burls) as solar heating for pools & swimming areas. Cutting to smaller sizes is possible. Material: Polypropylene
Material
Main material: PE (polyethylene)
Features
Type: Solar tarpaulin for rectangular pools / pool cover
Intended purpose: Water heating
Operating mode: solar-powered
Product line: your GEAR Garden
Assembly: cutting to smaller sizes or different shapes is possible.
Dimensions
Max. length approx.: 800 cm
Width max. approx.: 500 cm
Colors, shapes, designs
Primary colour: blue
Data
GTIN (EAN): 4260635714079
Brand: your GEAR