yourGEAR tent peg RH 23 - very stable round wire peg made of galvanised steel - as a set with 30 pieces - safe and relaxed camping, even when it blows!
This robust tent peg is ideal for camping on normal to hard ground. This includes, above all, the surfaces that you will find on most tent and camping sites. Stable ground anchors are particularly important in strong winds and when the guy ropes are subjected to high loads. The tent peg made of solid galvanised steel meets this criterion and anchors your tent firmly to the ground. The curved top prevents the guy line from slipping off the tent peg.
To ensure that the tent peg has optimum hold in the ground, it should be hammered in at a 45° angle and completely into the ground. Note that the hook (eye) attached to the head of the tent peg points away from the tent, otherwise the tensioning line will find no or only very poor hold. The tent ropes should be used as long as possible when tensioning. A flat angle leads to better absorption of wind forces.
A camping hammer (rubber mallet) can be used to easily drive the peg into the ground even on harder soils. If resistance occurs when driving in the tent peg, usually caused by stones or roots, it is imperative to pull out the tent peg and re-position it. In such a case, hitting the tent peg harder with a hammer will not achieve the desired result, but will damage the pegs. When dismantling, it is advisable to use a peg puller to remove the ground pegs.
The RH 23 peg is made of galvanised steel. The ground peg has a whopping diameter of 7 mm, a length of 230 mm and is supplied as a set of 30.
yourGEAR is a brand from Germany.
- Tent peg set consisting of 30 pegs, made of galvanized steel. The nails are used to secure tents, sun sails, tarps, pavilions, sun protection, sight protection, tension ropes & beach shells
- The peg has a round profile. The pen shape is pointed at the bottom. The high-quality workmanship makes the ground anchor very robust and durable. Diameter: 7 mm, length: 23 cm
- The tent nail is designed for hard and normal ground conditions such as grass, lawns, meadows, forests as well as stony and loamy soils and is suitable for a camping hammer.
- The nail shape of the camping peg makes it easy to hammer in. The steel peg is set at a 45 degree angle to the ground and is ideal for securing tents, garden pavilions, beach shells, tarpaulins and sails.
- The hook at the upper end prevents the tension line from slipping off. If there is resistance when the herring is driven in, it must be realigned to avoid damage.
Material
Main material: Steel, galvanised
Features
Type: Tent peg
Intended purpose: hard and normal ground (stony ground, woods, fields)
Product line: yourGEAR Camping
Dimensions
Diameter approx.: 7 mm
Max. length approx.: 230 mm
Further information: 30 unit(s)
Colors, shapes, designs
Primary colour: golden yellow
Data
GTIN (EAN): 4260635710613
Brand: yourGEAR
Item net weight approx.: 0,75kg
Pack size: (LxWxH) 25x5x3cm